| | | | |
| My Shopping Cart | | Qty | Item | Total | | £0.00 |
|
|
| | | |
|
We are actually a real chandlery shop! You can speak to our friendly staff and browse our products in store.
We are open:
Mon-Fri: 9.00 - 5.00
Sat: 9:00 - 3:30
| | |
|
| | | | | |
|
Why not subscribe to our Newsletter for Special Offers and latest news! Enter your email address below: |
|
| | | | | | | | |
|
|
|
|
|
|
|
|
|
|
| SEATOUCH MARINE SPRAY PAINTS |
MOTOR SPRAY PAINTS |
 |
 |
| Reference |
For Outboard Motor |
| 18299 |
HB Evinrude blue 89+ |
| 18300 |
HB Johnson white 72+ |
| 18303 |
HB Johnson white 91+ |
| 18304 |
HB Mariner grey |
| 18305 |
HB Mariner metallic grey 86+ |
| 18306 |
HB Mercury black |
| 18309 |
HB Suzuki metallic grey 89+ |
| 18311 |
HB Tohatsu metallic grey 91+ |
| 18314 |
HB Yamaha blue 84+ |
| 18315 |
HB Yamaha metallic blue 74+ |
| 29455 |
HB Yamaha ocean metallic blue |
| 18316 |
HB Yamaha blue original |
| 29456 |
HB Yamaha grey metallic blue 94+ |
| 18317 |
HB Honda grey 88+ |
|
| Reference |
For Inboard Motor |
| 18322 |
HB Evinrude blue 89+ |
| 18323 |
IB Perkins blue 83+ |
| 18324 |
IB Perkins blue 87+ |
| 18326 |
IB Volvo base grey 72+ |
| 18327 |
IB Volvo aqua red 72+ |
| 18328 |
IB Volvo aqua green 72+ |
| 18329 |
IB Yanmar metallic grey 74 to 86 |
| 18330 |
IB Yanmar metallic grey 87+ |
|
| PRIMERS |
Reference |
Description |
| Primer for touch-up paint |
18343 |
Use as as undercoat. It improves the application of the Seatouch spray paint, prolongs its lifetime and enhances its perfect glossy finish. |
| Aluminium primer protection |
18344 |
Unprotected aluminium corrodes very rapidly ; Seatouch primer protection should be applied immediately after a shock or a scratch for optimum protection, as an undercoat before touch-up paint, or before any application of Plastimo 1.4 onto surfaces remaining underwater. |
|
| SPECIALTY PAINT |
Reference |
Description |
| High temperature paint, satin smooth black |
18338 |
Ideal for exhaust valves/pipes. Resists heat up to 800°C. For a perfect result, make sure that the metal surface is scraped clean and absolutely greasefree. |
|
| MULTI-PURPOSE PAINTS |
Colour |
Reference |
| To touch-up scratches on wood, metal or polyester. |
Matt black |
18339 |
| Glossy black |
18340 |
| Matt white |
18342 |
| Glossy white |
18341 |
|
Prepare the surface very carefully. If necessary, remove all traces of rust, then scrub, sand and clean, and allow the surface to dry.
Mask the parts to be protected, such as anodes.
Shake well before and during use (1 minute).
Avoid working in sun or wind.
Spray in regular inverted layers, holding the can 25 cm max. away from the surface to be painted.
After use, turn the can upside down and empty the valve.
In a 20°C environment, allow 15 to 20 minutes between 2 coats, and 20 hours to dry completely. |
|
|
|
|
|
|
|
|
 |
 |
| ANTIFOULING PLASTIMO |
Performance Antifouling |
 |
Selecting the right antifouling is essential, as it contributes to optimising your sailing, whatever the conditions : antifouling must be adapted to your boat, your navigation
programme and mooring area. |
•High performance, with gradual polishing ratio, for sail and power boats (< 40 knots), except aluminium hulls.
•High fouling areas.
•Suitable for drying berths.
•Good compatibility.
•Coverage ratio : 8.80 m2/litre.
•Minimum temperature during application : + 5°C.
In 20°C ambient temperature, wait 2 \'bd hours before overcoating and 4 hours before launching. |
|
|
|
|
|
| |
Load waterline |
| FeetMetres |
20
6 |
257.5 |
288.5 |
309 |
3310 |
3510.7 |
3811.5 |
4313 |
4814.5 |
 |
2.75 L |
4.5 L |
5.75 L |
6.5 L |
8 L |
9 L |
10.5 L |
13.5 L |
16.75 L |
 |
3.25 L |
5 L |
6.25 L |
7 L |
8.75 L |
9.75 L |
11.5 L |
14.75 L |
18.25 L |
 |
2.25 L |
3.25 L |
4.25 L |
5 L |
6 L |
6.25 L |
7.5 L |
8 L |
9.5 L |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
| SURFACE PREPARATION |
Primers |
 |
 |
| |
Underwater |
Epoxy |
| Features and recomended use |
Use below waterline. Acts as an insulation coat between two different paints. Improves adhesion on a surface with a previous coat or on an antifouling in poor condition. |
Use below and above waterline. High performance protection of all rigid surfaces + protection from abuse and abrasion. |
| Polyester |
|
|
| Wood |
|
no |
| Steel / ferro cement |
|
|
| Osmosis prevention |
no |
|
|
| Description |
Underwater primer |
Epoxy primer |
| Colour |
Silver grey |
Silver red |
| Capacity |
0.75 L |
2.5 L |
1 L |
| Reference |
54872 |
54873 |
54874 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ANTIFOULING PLASTIMO |
Racing Antifouling |
 |
 |
Selecting the right antifouling is essential, as it contributes to optimising your sailing, whatever the conditions : antifouling must be adapted to your boat, your navigation
programme and mooring area. |
•Ultimate performance self-polishing antifouling, ideal for serious racers and fast powercruisers (< 70 knots), except aluminium hulls.
•Very high fouling areas.
•Very bright colours.
•Sandable, suitable for drying berths.
•Good compatibility.
•Coverage ratio : 11.20 m2/litre.
•Minimum temperature during application : + 5°C.
In 20°C ambient temperature, wait 2 \'bd hours before overcoating and 4 hours before launching. |
|
|
|
| |
Load waterline |
| FeetMetres |
20
6 |
257.5 |
288.5 |
309 |
3310 |
3510.7 |
3811.5 |
4313 |
4814.5 |
| |
2.75 L |
4.5 L |
5.75 L |
6.5 L |
8 L |
9 L |
10.5 L |
13.5 L |
16.75 L |
| |
3.25 L |
5 L |
6.25 L |
7 L |
8.75 L |
9.75 L |
11.5 L |
14.75 L |
18.25 L |
| |
2.25 L |
3.25 L |
4.25 L |
5 L |
6 L |
6.25 L |
7.5 L |
8 L |
9.5 L |
|
|
|
|
|
|
|
|
|
|
| SURFACE PREPARATION |
Thinners |
 |
 |
 |
| When application is conducted in normal weather conditions, the use of a primer is not necessary. |
|
|
|
|
Do your paintwork safely
Read labels carefully before you start working and follow strictly the health and safety instructions. Always work in a well ventilated place. Never dry-sand antifouling. Handle the cans with care and keep them tightly closed. Dispose of used cans in authorised containers or waste centres.
|
|
|
|
|
|
|
|
|
|
|
Red 
Blue 
Navy blue 
Black 
Grey 
Green 
White 
