Search Our Site


Shopping Cart
My Shopping Cart
QtyItemTotal
£0.00
View Cart | Checkout

 

 
 
 
 You can speak to our friendly staff,who owns and sails a yacht, and browse our products on line.

 
 

Newsletter
Why not subscribe to our Newsletter for Special Offers and latest news! Enter your email address below:

The Yacht Shop is a major supplier of the leading boat chandlery brands:

Plastimo - Guy Cotten - Gill - UKHO - Jabsco - Aquafax - International - Blakes - Musto - English Braids

Follow Us On Twitter

> > >
Bilge Pumps

BILGE PUMPS

Pump 925C & 1038C: compact with integrated handle

Compact
•The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult.
•Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting.

Optimum safety
• No hassle looking for the handle at the critical moment: the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle.
• In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately.

Simple installation and maintenance
• Installing the pump is extremely simple: all done from the cockpit.
• The diaphragm can be removed within seconds; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary.
• Construction from materials impervious to UV-rays.

Design
• One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

Very compact pump with the handle integrated in the cover.
Suitable for connection to an optional By-Pass (see following pages).
Pump model PUMP 925C PUMP 1038C
Reference 55764 55765
Output 0.9 litre per cycle 1 litre per cycle
Capacity, as per ISO 15083 standard
(45 strokes per minute, with a 10 kPA depression)
40.5 litres/minute 45 litres/minute
Weight 0,750 kg 0,750 kg
Hose diameter Ø 25 mm (1'') Ø 38 mm (11/2'')
Supplied with: 2 elbow connectors with valves (inlet and outlet) 2 elbow connectors with valves (inlet and outlet)
Options Reference
By-Pass connector (see following pages) 53060
* Création
Version Reference Description
Option 53060 By-Pass connector
See By-Pass connector on following pages
Instruction manual
BILGE PUMPS

Pump 925 and 1038: with telescopic handle

Compact
•The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult.
•Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting.

Optimum safety
• No hassle looking for the handle at the critical moment: the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle.
• In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately.

Simple installation and maintenance
• Installing the pump is extremely simple: all done from the cockpit.
• The diaphragm can be removed within seconds; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary.
• Construction from materials impervious to UV-rays.

Design
• One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

Bilge pump with telescopic handle, for efficient and more comfortable pumping.
A version with By-Pass connector allows the connection of both a hand pump and an electric centrifugal on a single water circuit.*

* Not suitable for a diaphragm or a flexible impeller electric pump.
Pump model PUMP 925
sans By-Pass
Pump 925
avec By-Pass
PUMP 1038
sans By-Pass
Pump 1038
avec By-Pass
Reference 39539 53058 39541 53059
Output 0.9 litre per cycle 0,9 L/cycle 1 litre per cycle 1 L/cycle
Capacity, as per ISO 15083 standard
(45 strokes per minute, with a 10 kPA depression)
40.5 litres/minute 40.5 L/min 45 litres/minute 45 L/min
Weight (kg) 0,920 kg 1,050 kg 0,920 kg 1,050 kg
Hose diameter Ø 25 mm (1") 25 mm (1'') Ø 38 mm (11/2") 38 mm (11/2'')
Supplied with: 2 elbow fittings with valve (inlet & outlet) 2 elbow fittings with valve (inlet & outlet)
* Création
Without By-Pass
With By-Pass
BILGE PUMPS

By-Pass, bilge pump connector

Manual
Electric
Compact
•The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult.
•Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting.

Optimum safety
• No hassle looking for the handle at the critical moment: the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle.
• In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately.

Simple installation and maintenance
• Installing the pump is extremely simple: all done from the cockpit.
• The diaphragm can be removed within seconds; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary.
• Construction from materials impervious to UV-rays.

Design
• One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

The By-Pass adapts on pumps 925 & 1038 or 925C & 1038C and allows the connection of both a hand pump and an electric centrifugal* pump on a single water circuit.
*not suitable for a diaphragm or a flexible impeller electric pump.
•Simplified installation: the single circuit common to both pumps is a major time/ labour saving asset for boatbuilders.
•Easy connection: straight/elbow fittings with O-rings snap-in easily.
•Minimal maintenance: fittings snap off easily to remove debris or replace valves if necessary.
Reference
53060
BILGE PUMPS

Outlet with non-return valve

42797 | 42797 + 42798, Ø 38 mm
(or 42799, Ø 25 mm)

42798, Ø 38 | 55770, Ø 28 | 55135, Ø 25/38 | 42779, Ø 25 | 53062, Ø 28 | 55789, Ø 25-38 | 40676 | 40677

Various options are possible to set the outlet most adapted to your needs.

Compact
•The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult.
•Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting.

Optimum safety
• No hassle looking for the handle at the critical moment: the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated telescopic or compact handle.
• In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately.

Simple installation and maintenance
• Installing the pump is extremely simple: all done from the cockpit.
• The diaphragm can be removed within seconds; no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary.
• Construction from materials impervious to UV-rays.

Design
• One obviously expects from a pump that it should first and foremost be efficient... In addition to the remarkable technical performance, Plastimo has paid a particular attention to design and aesthetics, building on years of expertise in composite materials and plastic engineering. The result is a stylishly designed pump, which matches very nicely the cockpit of modern boats.

Prevents backflow into the bilges: mounted as close as possible to the strainer, the non-return valve locks up the water in the hose.

• Straight outlet for hose Ø 25 or 38 mm: simply sawing off the Ø 25 outlet
• Polyamide valve + nitrile gasket, fuel resistant.
• Bellows-type gasket allows debris such as seaweed or small cloth. Can be replaced by a flat gasket. converts the valve in a Ø 38 mm fitting (a pre-moulded groove indicates where to cut).
Draining

Electric bilge pumps, manual operation

Impact resistant plastic, impervious
to detergents and motor fuels.
The motor is totally enclosed in a
rubber boot, providing increased
efficiency and cooling.
Motor and propeller mounted on
aluminium plate.
Manually operated pumps can be
converted into automatic pumps,
with the addition of a float switch:
Reference Power Output litres/hour Consumption Hose Ø Dimensions
Ø x height
open flow at 1 m
16226 12 V 1500 1300 3 Amp 19 mm 90 x 105 mm
16223 12 V 2200 1800 4,2 Amp 19 mm 100 x 120 mm
16224 24 V 2200 1800 2,5 Amp 19 mm 100 x 120 mm
16210 12 V 4800 4000 6,5 Amp 28 mm 130 x 160 mm
16211 24 V 4800 4000 5 Amp 28 mm 130 x 160 mm
Draining

Heavy duty bilge pumps

Rugged ABS construction, designed for intensive use on board commercial/work boats.
Corrosion and chemical housing resists impacts and hull pounding. Parabolic chamber design moves
water around housing: this helps cool the motor, decreases power consumption and prolongs motor life.
Also expels debris without clogging impeller. Stainless steel motor shaft.
Easy installation: the mounting bracket can be installed in a variety of positions and the pump mounts to
the bracket with a click-lock feature. Easy maintenance: the powerhead, pump chamber and mounting
bracket are detachable for easy cleaning. Supplied with 90 cm caulked copper wire.
Model Reference Volt Output at 1 m Consumption Weight
HD 1700 29387 12 V 4500 L/hour 5,8 Amp 1,500 kg
HD 1700 31308 24 V
HD 2000 29388 12 V 5500 L/hour 7 Amp 1,540 kg
HD 2000 31309 24 V
Exterior dimensions and hose outlet (11/8") are the same for all models.
SUBMERSIBLE BILGE PUMPS

Tsunami electrical pumps

Performant and designed to last:
Protected motor and wiring, to prevent water damage and corrosion. Free-flowing water around the pumps motor housing (B). It keeps motor cooled and extends the pump lifetime.

Easy maintenance:
Double-filter base (D) to resist clogging. Quick and easy maintenance and replacement, even in tight spaces:
a handy base tab (C) enables to unlock filter from housing.
the motor cartridge locks and unlocks easily with one-hand access, twist-to-lock (A).

Simple installation: no mounting brackets necessary, fixing holes are located directly on the base of the pump. Supplied assembled, ready for installation.

Features:
- permanent-magnet motor
- 316 stainless steel axis
- 90-cm tinned electrical wire for corrosion resistance.
Reference Model A
mm
B
mm
C
mm
D
mm
E
mm
186481 T500 70 73 92 19 79
186482 T800 80 82 111 19 89
186483 T1200 80 82 111 28 95
Ref. Model Volt Consum-
ption
Amp.
Output litres/hour For int. Ø
hoses
For hose Weight
open flow at 1 m
186481 T500 12 V 1,3 1798 1250 19 mm 3/4'' 240 g
186482 T800 12 V 2,5 2877 2274 19 mm 3/4'' 427 g
186483 T1200 12 V 3 4164 3066 28 mm 1-1/8'' 438 g
 
Draining

Sahara automatic bilge pumps

Combine sturdiness, simplicity of use and high efficiency:
• Motor is automatically operated by a reliable mechanical float switch (non toxic; contains no mercury).
• Shaft seal and caulked wiring provide extra protection to the motor, preventing leak paths. The free flow
of water around the motor housing keeps motor cool for extended life.
• 316 stainless steel motor shaft for saltwater corrosion resistance. Steel reinforced motor shaft ensures
perfect alignment of shaft and seal, thus preventing leaks.
• Durable impeller is made of tough, high-impact, glass filled polyester.
• Re-inforced filter for optimum protection of the impeller.
• Test knob allows for easy and immediate operational check without disassembly.
• Compact size and low-profile design allow installation in tight places.
Model Reference Volt Output at 1 m Consumption Weight
S 500 42908 12 V 1150 L/hour 1,2 Amp 0,380 kg
S 750 42909 12 V 1800 L/hour 2,5 Amp 0,500 kg
S 1100 42910 12 V 3100 L/hour 3,4 Amp 0,500 kg
42908 - 42909: Ø 19 mm
42910: Ø 28 mm
ISO 15083 standard requires the following
minimum performance, at a 1 m height:
• Boat ² 6 m-20 ft: 600 L/hour.
• Boat > 6 m-20 ft: 900 L/hour.
• Boat ³ 12 m-39 ft: 1800 L/hour.
Draining

Water pressure system pump

Dot not immerse.
All metal parts are in marine
grade stainless steel.
Can run dry without damage.
Reference Power Output
(at 1.50 m height)
Consumption
10398 12 V 1000 L/hour 7 Amp
39801 24 V 1000 L/hour 5 Amp
Draining

Automatic bilge switches

Manufactured in anti-corrosive ABS plastic, these switches will ensure
the best service for every automatic bilge pump function on board.
10-12 Volt.
10 Amp. max.
Version Reference
Switch with encased float 10524
Switch with free float 10525
Draining

Bilge pump 3-way switch

Reference Description
13293 3-way switch (Auto, Off, Manual) for use with automatic pumps or pumps with a float switch. 12 Volt dc. Dimensions: 70 x 45 mm. Installation hole size: 22 x 38 mm.
Draining

Bilge pump alarm

Reference Description
13261 Detects any abnormal operation of the bilge pump and produces a clear visual (red light) and sound (buzzer) signal. 12 Volt.
Draining

Bilge pump alarm switch

3-way system:
• Manual: for manual operation of the bilge pump.
• Automatic: for automatic operation of the bilge pump; detects any abnormal operation of the pump, and produces a clear visual (red light) and sound (buzzer) signal.
• Stop: detects a water entry, produces a visual and sound alarm and triggers the pump simultaneously.
12 Volt.
Reference
13262
SUBMERSIBLE BILGE PUMPS

Bilge pump installation kit

12V, for pumps ref. 186481 and 186482.
Kit includes:
- one 2-way swith (on/off) with plate
- 1.5-m of flexible hose, int. Ø 19 mm (\'be ")
- one thru-hull fitting for hose int. Ø 19 mm (3/4")
- 6 m of 2-conductor cable, 16 AWG gauge
- 1 fuse holder with 2-amp fuse
- 2 plastic hose clamps
Reference
57267

 

DIAPHRAGM PUMPS

DIAPHRAGM PUMPS

Choice of outlets for single action pump 11722
Watertight gasket and cover, conform to IOR rule
Corrosion, electrolysis and fuel resistant bilge pumps.
Of rugged construction, they produce high capacity output with
the convenience of many mounting positions (see drawings).
• Self-priming and leak free.
• Quick release inspection cover for added safety.

The double action pump is equipped with outlet elbows,
swivelling on 220°, thus allowing all mounting positions and
reducing the clearance required (290 mm to 400 mm maximum).
The outlet elbows are screwed and fitted with an O-ring for
perfect watertightness and added safety (quick release facility).
Straight outlets 17491 and elbows 17492 can also be mounted
on pump C, which alllows pumping in two different locations on
the boat, while having only one waste water outlet.
Model Single action
A
Single action
B
shown on photo with outlet elbows
Double action
C
Reference 11723 11722 11724
Product Built-in outlets 17491
17492
Outlets supplied with pump
Model Single action Single action Double action
Reference 11723 11722 11724
Weight 0,965 kg 0,990 kg 1,840 kg
Capacity output
When pumping at 1 m height
Discharging at 2 m
0.85 L per stroke 1.3 L per stroke
Maximum lift 3 m
Hose diameter 38 mm
Description Reference
Watertight gasket with cover complying with IOR rule (see photo and drawing) 14263
Cover alone 12611
Spare handle, length 40 cm 14315
Hose diameter 38 mm 16216
Handle stowage clips 16702
Screw cap for back part of pump 18040
Kit of 2 straight outlets (a) : Single action B: 11722 17491
Kit of 2 outlet elbows (b) : Single action B: 11722 17492

 

DIAPHRAGM PUMPS

Electric diaphragm pump, for bilge, livewell and waste waters

Corrosion, electrolysis and fuel resistant bilge pumps.
Of rugged construction, they produce high capacity output with
the convenience of many mounting positions (see drawings).
• Self-priming and leak free.
• Quick release inspection cover for added safety.

The double action pump is equipped with outlet elbows,
swivelling on 220°, thus allowing all mounting positions and
reducing the clearance required (290 mm to 400 mm maximum).
The outlet elbows are screwed and fitted with an O-ring for
perfect watertightness and added safety (quick release facility).
Straight outlets 17491 and elbows 17492 can also be mounted
on pump C, which alllows pumping in two different locations on
the boat, while having only one waste water outlet.
A comprehensive range of self-priming pumps, specifically designed to drain the bilge, livewell, heads, shower or sink.
No filter is needed; pump can therefore operate with no risk of seizing up the outlet pipes. These pumps also allow the temporary storage of waste water in a tank (see WC page).
Specially designed for the boaters' needs, the electric motor features low power consumption. It is easy to mount in 2 positions (horizontal or vertical) and oriented in 8 different directions. This adds flexibility, especially when installing the pump in a small volume area.

The electric bilge and waste pumps feature the same advantages as the manual pump, i.e.: choice of outlets (18561 and 18562 models), quick release inspection lid for added safety.
Reference 18556 18561 18557 18562
Base Built-in outlets Screw-on outlets Built-in outlets Screw-on outlets
Power 12 V 24 V
Technical specifications
Power consumption
6 Amp 3 Amp
Max. fuse amperage 20 Amp. 10 Amp.
Capacity output
When pumping at 1 m height
Discharging at 2 m
35 liters/minute
Weight 3,500 kg
Height
Vertical motor
340 mm
Horizontal motor 260 mm
Hose diameter 38 mm
version Reference Code
Kit of 2 straight outlets 17491
Kit of 2 elbow outlets 17492 To convert our manual pumps into electric pumps:
12 V conversion kit 18563
24 V conversion kit 18564
10 m hose Ø 38 mm 16216
Options/electric pump
Required equipment
DIAPHRAGM PUMPS

Diaphragm pump

Corrosion, electrolysis and fuel resistant bilge pumps.
Of rugged construction, they produce high capacity output with
the convenience of many mounting positions (see drawings).
• Self-priming and leak free.
• Quick release inspection cover for added safety.

The double action pump is equipped with outlet elbows,
swivelling on 220°, thus allowing all mounting positions and
reducing the clearance required (290 mm to 400 mm maximum).
The outlet elbows are screwed and fitted with an O-ring for
perfect watertightness and added safety (quick release facility).
Straight outlets 17491 and elbows 17492 can also be mounted
on pump C, which alllows pumping in two different locations on
the boat, while having only one waste water outlet.
Moulded in highly resistant plastic; all metal parts
in stainless steel. Easily removable
diaphragm. Multi-mounting position
bilge pump: up to 8 possible
mounting positions.
Horizontal or vertical mounting.
Pump comes complete
with 2 outlets Ø 25 mm.

To have access to the pump chamber, pull handle in upright position.
Remove the pin which secures the handle onto the diaphragm and
turn the pump body anti-clockwise until free.
When mounting the pump, clearance should be allowed for full
height with handle up (see dimensions on drawing).
Reference
12760
Version Reference
25 m hose Ø 25 mm 16209
Technical specifications:
• Capacity output ..........0.5 l, per stroke, at 1 m height
• Maximum lift ..........3 metres
• Weight ..........0.500 kg
• Hose diameter ..........25 mm

DIAPHRAGM PUMPS

Hand pump

Corrosion, electrolysis and fuel resistant bilge pumps.
Of rugged construction, they produce high capacity output with
the convenience of many mounting positions (see drawings).
• Self-priming and leak free.
• Quick release inspection cover for added safety.

The double action pump is equipped with outlet elbows,
swivelling on 220°, thus allowing all mounting positions and
reducing the clearance required (290 mm to 400 mm maximum).
The outlet elbows are screwed and fitted with an O-ring for
perfect watertightness and added safety (quick release facility).
Straight outlets 17491 and elbows 17492 can also be mounted
on pump C, which alllows pumping in two different locations on
the boat, while having only one waste water outlet.
Self-priming. Can be used
in any position.
Easy to maintain.
Pump
+ 1 m hose
Pump
alone
Output
per stroke
Min.
dimensions
Stroke
27074 14089 0.50 l 480 mm 330 mm
27075 14105 0.75 l 630 mm 480 mm
27076 14090 1 l 790 mm 640 mm
Version Reference
25 m hose Ø 25 mm 16209
Accessories
Version Reference
Stowage clips Ø 50 mm 16707
 
Draining

Plastic bucket

version Reference
• Bucket with rope 17576
• Bucket without rope 14375
Draining

Rubber bucket

Reference Code
14054 Aluminium handle. Capacity 7 litres.
Draining

Plastic bailer

Reference Description
16207 Unbreakable, floating polyethylene.
Draining

Wooden plugs

* Max-min diameter.
Reference Description
10103 Set of 9 conical wooden plugs:
3 x 110 mm high x Ø 29-19 mm*
3 x 110 mm high x Ø 39-29 mm*
3 x 110 mm highx Ø 50-40 mm
16323 Set of 9 conical wooden plugs:
2 x 40 mm hight x Ø 10-4 mm*
2 x 50 mm high x Ø 16-8 mm*
2 x 60 mm high x Ø 22-14 mm*
2 x 70 mm high x Ø 30-18 mm*
1 x 80 mm high x Ø 35-25 mm

 


Admission Valve Bilge Pump

£4.28


 

Angled Nozzles(2)+Gskts Fr Pump 1038

£5.65


 

Back Plate For Pump 11722-11723

£5.23


 

Bilge Pump 1038

£90.12


 

Bilge Pump 1038C

£79.30


 
Bilge Pump 925
Bilge Pump 925

£92.56


 
Bilge Pump 925 with By Pass
Bilge Pump 925 with By Pass

£105.76


 
Bilge Pump 925C
Bilge Pump 925C

£82.00


 
By Pass For Pump 925 + 1038
By Pass For Pump 925 + 1038

£21.20


 

Cover For Bilge Pump 1038

£10.04


 

Cover For Bilge Pump 925

£9.97


 

Cover For Bilge Pump 925C And 1038C

£23.57


 
Diaphragm Pump
Diaphragm Pump

£51.36


 
Double Action Diaphragm Pump
Double Action Diaphragm Pump

£137.38


 
Elbow Outlet Male D28mm/Bilge Pump
Elbow Outlet Male D28mm/Bilge Pump

£4.90


 

Fixing Clamps Bilge Pump (X2)

£4.00


 

Hand Pump 0.50 L + M Pipe

£20.28


 

Hand Pump 0.75 L + 1M Pipe

£21.42


 
Hand Pump 480mm
Hand Pump 480mm

£14.76


 
Hand Pump 790mm
Hand Pump 790mm

£20.26


 

Hose -D 38mm

£41.23


 

Kit Of 2 Straight Outlets For 11722

£19.43


 
Outlet Straight Male D25/38
Outlet Straight Male D25/38

£2.03


 

Pump 1038 + By Pass

£109.43


 
Single Action Diaphragm Pump
Single Action Diaphragm Pump

£83.75


 
Single Action Diaphragm Pump
Single Action Diaphragm Pump

£89.03


 

Spare Diaphragm for Bilge Pump Types 925 & 1038

£13.88



 

Spare Handle 40cm For Diaphragm Pump

£12.26


 
Straight Hose 28 mm 1 1/8 For Bypass
Straight Hose 28 mm 1 1/8 For Bypass

£5.82


 


All Major Credit & Debit Cards Accepted