Tested and patented: a water chamber inside a tough envelope. The Plastimo water tanks consist
of a welded non-porous tasteless
PVC water chamber (inner
bladder) inside a tough nylon
envelope, for complete
watertightness and resistance to
tearing and abrasion.
Water tanks are supplied complete, ready to install, with Ø 38 mm inlet fitting and Ø 12 mm outlet valves.
Ø 38 mm inlet valve is situated on upper side of tank;
Ø 12 mm outlet valve is situated on underneath side of tank.
(except on triangular model: inlet and outlet are both on upper side of tank).
Height of tanks, when filled to capacity: 25 cm.
Outlet valve, situated on underneath side of tank.
Manufactured from polyethylene.
Supplied with a PVC 90° elbow and inlet fitting.
Inlet and outlet fittings offer the possibility to use 3 different hose diameters:
• Inlet: 35 mm, 50 mm, 60 mm.
• Outlet: 25 mm, 38 mm, 50 mm.