| | | | |
| My Shopping Cart | | Qty | Item | Total | | £0.00 |
|
|
| | | |
|
We are actually a real chandlery shop! You can speak to our friendly staff and browse our products in store.
We are open:
Mon-Fri: 9.00 - 5.00
Sat: 9:00 - 3:30
| | |
|
| | | | | |
|
Why not subscribe to our Newsletter for Special Offers and latest news! Enter your email address below: |
|
| | | | | | | | |
|
|
|
|
|
|
|
|
|
|
|
|
| LOW PRESSURE WATERMAKER |
Watermaker |
 |
 |
 |
|
|
| Low pressure pump for sea water supply. |
|
Development
Plastimo watermaker stems from sophisticated development and complies with stringent specifications.Simplified maintenance thanks to standard components and minimal moving parts when in use.
Operation
•A low pressure pump,positioned at least 200 mm below the waterline, drives sea water through 5 and 20 µ filters to an amplifier, with a 6 to 8 bar pressure.The amplifier feeds inverted osmosis diaphragms with a 60 bar pressure.
•It produces drinkable water within approx. 2 minutes,ready to fill the watertanks.
Water quality can be checked, with the addition of optional saltmeter (ref.53428).
Installation
Simple and convenient installation. Virtually silent,it can be installed next to the cabins and run night and day. Comes as standard with :
•Remote control panel.
•On/Off switch.
•LED activation indicator.
•Pre-wiring for optional Flushing and saltmeter (the control panel is designed to accept the later addition of these options).
Maintenance
The Plastimo watermaker has been specially designed for simplified maintenance. For an extended lifetime, it must be maintained at regular intervals :
•Replace the 5 and 20 µ filters when fouled up.
•Rinse with fresh water before stopping the system for over 3 days.
•Rinse with a storage fluid before stopping the system for a 10 days to 2-3 months period.
•End of season winterising.
|
| Reference |
53421 |
53422 |
| Capacity |
15 L/H |
30 L/H |
| Power |
12 V |
12 V |
| Power consumpt. |
7 Amps |
12 Amps |
| Dimensions |
70x30x20 cm |
70x30x20 cm |
| Weight |
32 kg |
32 kg |
|
| Version |
Reference |
| 15 litres/hour |
53421 |
| 30 litres/hour |
53422 |
|
|
 |
| Instruction manual |
|
|
|
|
|
| LOW PRESSURE WATERMAKER |
Installation kit |
Includes :
- 3-way inlet valve,
- inlet strainer,
- 3-way outlet valve,
- Ø 8 mm,3 m hoses,max.pressure 15 bar,
- Ø 15 mm,12 m hoses,max.pressure 15 bar,
- 316 st.steel fastening brackets,
- rubber pads,
- bolts,screws and clamps. |
|
|
|
|
|
|
|
|
| LOW PRESSURE WATERMAKER |
|
|
Maintenance products |
 |
|
|
| Version |
Reference |
| 5 µ filter |
53425 |
| 20 µ filter |
53426 |
| Storage fluid |
53427 |
| Winterising kit, including : - 5 µ filter,- 20 µ filter,- storage fluid,- cleaning fluid. |
53424 |
|
|
|
|
|
|
|
|
| LOW PRESSURE WATERMAKER |
|
|
Automatic saltmeter |
 |
Can be positioned on the diaphragm output.
The saltmeter checks the salinity of the water and either rejects it to the sea,or drives it to the watertank.2 LEDs on the control panel give immediate information on the quality of the water.
|
|
|
|
|
|
|
| LOW PRESSURE WATERMAKER |
|
|
Flushing |
 |
Automatic rinsing option (Flushing) to be connected to the system thanks to a remote control pre-wired on the control panel.
Flushing is supplied with an anti-chlorine filter, to use the water from the main watertank even when tank was filled with dock-supply water.
A simple pressure on a control switch monitors the rinsing operation cycle. |
|
|
|
|
|
|
|
|
|
|
| Plastimo aqua-basewatermakers |
Battery operated watermakers |
 |
• Optimum quality
All models feature highly reliable components, tested and approved to ensure a total peaceful mind when sailing. The high pressure pumps with 3 ceramic pistons are corrosion resistant. The filtering diaphragms can bear pressures several times higher than operation pressures. The chassis is engineered from 316 L stainless steel.
Construction complies with ISO 9001 standards ; every model, whatever the size, is tested before shipment.
• Simple and convenient installation
The water maker is supplied either in kit or on a frame, to suit your installation requirements. Its components are designed to produce absolute minimum vibrations (further absorbed by rubber pads under the plate). The watermaker can be used at night or when the team is resting.
• Drinking water on a daily use basis
A 5 micron filter keeps impurities away from the circuit.
A saltmeter checks constantly the quality of the water and controls the smooth general operation of the system. It activates a seacock, which rejects the water to the sea as soon as it detects an anomaly and informs you about it.
• Minimum power consumption adapted to your navigation programme
Without compromising on the reliability of the system and the quality of the water produced, the Plastimo Aqua-Base dessalinisator is designed for minimal power consumption : it requires only 30 Amp/hour to produce 60 litres.
• Easy and safe maintenance
The Plastimo Aqua-Base system is designed for a high water circulation in the diaphragm, hence a lower salt concentration and a longer diaphragm lifetime. Rinsing with fresh water is therefore not necessary, which means further saving on the water produced.
A simple yearly maintenance operation, or if the system has not been used for over 2 weeks, is necessary and easily carried out with the optional maintenance kit. |
| Reference |
Range |
Output |
Power |
Power consumption |
Weight |
Dimensions |
Separation
kit |
Remote
control pael |
Maintenance
kit |
| 42043 |
X |
30 L/h |
12 V |
31 A |
29 kg |
69 x 32 x 30 cm |
42051 |
42052 |
42053 |
| 42044 |
50 L/h |
12 V |
31 A |
31 kg |
69 x 32 x 30 cm |
| 42045 |
60 L/h |
24 V |
25 A |
33 kg |
69 x 32 x 30 cm |
42792 |
|
 |
|
|
|
|
|
|
|
|
| Plastimo aqua-basewatermakers |
Generator operated watermakers |
|
• Optimum quality
All models feature highly reliable components, tested and approved to ensure a total peaceful mind when sailing. The high pressure pumps with 3 ceramic pistons are corrosion resistant. The filtering diaphragms can bear pressures several times higher than operation pressures. The chassis is engineered from 316 L stainless steel.
Construction complies with ISO 9001 standards ; every model, whatever the size, is tested before shipment.
• Simple and convenient installation
The water maker is supplied either in kit or on a frame, to suit your installation requirements. Its components are designed to produce absolute minimum vibrations (further absorbed by rubber pads under the plate). The watermaker can be used at night or when the team is resting.
• Drinking water on a daily use basis
A 5 micron filter keeps impurities away from the circuit.
A saltmeter checks constantly the quality of the water and controls the smooth general operation of the system. It activates a seacock, which rejects the water to the sea as soon as it detects an anomaly and informs you about it.
• Minimum power consumption adapted to your navigation programme
Without compromising on the reliability of the system and the quality of the water produced, the Plastimo Aqua-Base dessalinisator is designed for minimal power consumption : it requires only 30 Amp/hour to produce 60 litres.
• Easy and safe maintenance
The Plastimo Aqua-Base system is designed for a high water circulation in the diaphragm, hence a lower salt concentration and a longer diaphragm lifetime. Rinsing with fresh water is therefore not necessary, which means further saving on the water produced.
A simple yearly maintenance operation, or if the system has not been used for over 2 weeks, is necessary and easily carried out with the optional maintenance kit. |
| Reference |
Range |
Output |
Power |
Power consumption |
Weight |
Dimensions |
Separation
kit |
Remote
control pael |
Maintenance
kit |
| 42046 |
X |
60 L/h |
220 V |
1300 W |
35 kg |
69 x 32 x 30 cm |
42051 |
42792 |
42053 |
| 42047 |
90 L/h |
220 V |
1300 W |
37 kg |
| 42048 |
Y |
120 L/h |
220 V |
1500 W |
63 kg |
118 x 38 x 33,5 cm |
- |
42054 |
| 42049 |
180 L/h |
220 V |
1500 W |
70 kg |
| 42050 |
240 L/h |
220 V |
1500 W |
77 kg |
|
| Version |
Reference |
Description |
| Separation |
42051 |
Transforms the frame into a kit, thus facilitating the installation in space restricted areas. |
|
| Options |
| version |
Reference |
Description |
Remote control panel
12 Volt |
42052 |
To separate the control panel from the chassis, and install the controlpanel in a convenient location ; particulary useful when the dessalinisator is installed in a hard to reach area. |
| 24/220 Volt |
42792 |
|
|
|
 |
| Installation and instruction manual : Aquabase - X range - 200 V |
| Installation and instruction manual : Aquabase - Y range - 200 V |
|
|
|
|
|
|
| Plastimo aqua-basewatermakers |
|
|
Separation |
 |
• Optimum quality
All models feature highly reliable components, tested and approved to ensure a total peaceful mind when sailing. The high pressure pumps with 3 ceramic pistons are corrosion resistant. The filtering diaphragms can bear pressures several times higher than operation pressures. The chassis is engineered from 316 L stainless steel.
Construction complies with ISO 9001 standards ; every model, whatever the size, is tested before shipment.
• Simple and convenient installation
The water maker is supplied either in kit or on a frame, to suit your installation requirements. Its components are designed to produce absolute minimum vibrations (further absorbed by rubber pads under the plate). The watermaker can be used at night or when the team is resting.
• Drinking water on a daily use basis
A 5 micron filter keeps impurities away from the circuit.
A saltmeter checks constantly the quality of the water and controls the smooth general operation of the system. It activates a seacock, which rejects the water to the sea as soon as it detects an anomaly and informs you about it.
• Minimum power consumption adapted to your navigation programme
Without compromising on the reliability of the system and the quality of the water produced, the Plastimo Aqua-Base dessalinisator is designed for minimal power consumption : it requires only 30 Amp/hour to produce 60 litres.
• Easy and safe maintenance
The Plastimo Aqua-Base system is designed for a high water circulation in the diaphragm, hence a lower salt concentration and a longer diaphragm lifetime. Rinsing with fresh water is therefore not necessary, which means further saving on the water produced.
A simple yearly maintenance operation, or if the system has not been used for over 2 weeks, is necessary and easily carried out with the optional maintenance kit. |
| Transforms the frame into a kit, thus facilitating the installation in space restricted areas. |
|
|
|
|
|
|
|
|
| Plastimo aqua-basewatermakers |
|
|
Remote control panel |
 |
• Optimum quality
All models feature highly reliable components, tested and approved to ensure a total peaceful mind when sailing. The high pressure pumps with 3 ceramic pistons are corrosion resistant. The filtering diaphragms can bear pressures several times higher than operation pressures. The chassis is engineered from 316 L stainless steel.
Construction complies with ISO 9001 standards ; every model, whatever the size, is tested before shipment.
• Simple and convenient installation
The water maker is supplied either in kit or on a frame, to suit your installation requirements. Its components are designed to produce absolute minimum vibrations (further absorbed by rubber pads under the plate). The watermaker can be used at night or when the team is resting.
• Drinking water on a daily use basis
A 5 micron filter keeps impurities away from the circuit.
A saltmeter checks constantly the quality of the water and controls the smooth general operation of the system. It activates a seacock, which rejects the water to the sea as soon as it detects an anomaly and informs you about it.
• Minimum power consumption adapted to your navigation programme
Without compromising on the reliability of the system and the quality of the water produced, the Plastimo Aqua-Base dessalinisator is designed for minimal power consumption : it requires only 30 Amp/hour to produce 60 litres.
• Easy and safe maintenance
The Plastimo Aqua-Base system is designed for a high water circulation in the diaphragm, hence a lower salt concentration and a longer diaphragm lifetime. Rinsing with fresh water is therefore not necessary, which means further saving on the water produced.
A simple yearly maintenance operation, or if the system has not been used for over 2 weeks, is necessary and easily carried out with the optional maintenance kit. |
| version |
Reference |
Description |
Remote control panel
12 Volt |
42052 |
To separate the control panel from the chassis, and install the controlpanel in a convenient location ; particulary useful when the dessalinisator is installed in a hard to reach area. |
| 24/220 Volt |
42792 |
|
|
|
|
|
|
|
|
|
|
|
|
